Panasonic KXTG7431 - Manual (Page 11)

Getting Started
11 For assistance, please visit http://www.panasonic.com/help
Display
Handset display items
Temporary switch of
the display mode
You can select to display either a single
item or multiple items on one screen at a
time for the following features:
– menu list, phonebook list, caller list,
redial list, message list, and call block
list
– handset top menu icons in function
menu
The following icons are shown when you
press down on the center of the joystick
in standby mode.
You can temporarily switch the display
mode as follows by pressing the right
soft key shown when viewing the lists or
selecting menu icons:
– {MULTI}: Multiple entries/all menu
icons are shown on one screen at a
time.
– {SINGLE}: An entry/a menu icon is
shown on one screen in large
characters at a time.
Note:
L
You can set the unit to always show a
single item or multiple items
beforehand by selecting “Single
item” or “Multi items” as the
display mode setting (page 25).
L When “Multi items” is selected as
the display mode, you can switch the
screen to confirm the detailed
information by pressing {SINGLE}.
Item Meaning
w Within range of a base unit
_ Out of range of a base unit
S The line is in use.
L
When flashing:
– The call is put on
hold.
– The answering
system is answering
a call.
L When flashing rapidly:
An incoming call is now
being received.
s
Speaker is on. (page 13)
~ Ringer volume is off.
(page 21)
& Silent mode is on. (page
23)
( Clarity booster is on.
(page 15)
E Alarm is on. (page 23)
m Handset number
& Battery level
$ Blocked call (page 24)
Available for: KX-TGA740 handset
Icon Feature
W Caller list
s Answering device
# V.M. access
x Intercom
" Initial setting
! Customer support
TG743x(e).book Page 11 Monday, December 8, 2008 1:36 PM