Asus M2N-L - Manual (Page 74)

-2 Chapter : BIOS setup
USB 1.1 Controller [Enabled]
Enables or disables the USB 1.1 Controller.
Configuration options: [Disabled] [Enabled]
USB 2.0 Controller [Enabled]
Enables or disables the USB 2.0 Controller.
Configuration options: [Disabled] [Enabled]
Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices. Setting to [Auto]
allows the system to detect the presence of USB devices at startup. If detected,
the USB controller legacy mode is enabled. If no USB device is detected, the
legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps).
Configuration options: [FullSpeed ] [HiSpeed ]
BIOS EHCI Hand-Off [Enabled]
Enables or disables the BIOS EHCI hand-off feature.
Configuration options: [Disabled] [Enabled]
4.4.7 Remote Access Configuration
The items in this menu allows you to configure the Remote Access type and and
parameters.
Remote Access Type [Disabled]
Allows you to set the Remote Access Type.
Configuration options: [Disabled] [Enabled]
Configure Remote Access type and parameters
Remote Access [Disabled]
Select Remote Access
type.