Asus M2N-L - Manual (Page 100)

- Chapter : Software support
3. Use the up or down arrow keys to select a the RAID set you want to rebuild,
then press . A confirmation message appears.
4. Press to start rebuilding
the array, or to cancel.
Rebuild array?
[ENTER] OK [ESC] Cancel
[↑↓] Select [F6] Back [F7] Finish
Array 1 : NVIDIA MIRROR XXX.XXG
- Select Disk Inside Array -
RAID Mode: Mirrored
Stripe Width: 1 Stripe Block: 64K
Port Index Disk Model Capacity
0.0 1 XXXXXXXXXXXXXXXXX XXX.XXGB
1.1 0 XXXXXXXXXXXXXXXXX XXX.XXGB
5. When you press , a confirmation message appears. Press to
overwrite all data on new (or added) disks, or to cancel. The array List
screen displays the RAID set after rebuilding.
All data on new (or added) disks will be overwritten. Continue?
[Y] YES [N] NO