Answering calls, Useful features during a call, Answering calls useful features during a call – Panasonic KXTG6672 User Manual
Page 14
Base unit / Handset
1
9 a MPAUSEN
2
Dial the phone number.
3
Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: M
N
Note:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed. Repeat as needed to
create longer pauses.
Answering calls
Using the base unit
When a call is being received, the SP-PHONE
indicator flashes rapidly.
1
Lift the corded handset or press M N when the
unit rings.
2
When you finish talking, place the corded
handset on the cradle. When the
speakerphone is used, press M N.
Using the handset
When a call is being received, the ringer indicator
flashes rapidly.
1
Lift the handset and press M
N or M N when
the unit rings.
R You can also answer the call by pressing
any dial key from 0 to 9, *, or #. (Any
key answer feature)
2
When you finish talking, press MOFFN or place
the handset on the charger.
Auto talk
You can answer calls simply by lifting the handset
off the charger. You do not need to press M
N.
To turn this feature on, see page 23.
Adjusting the ringer volume
Base unit / Handset
n
While the unit is ringing for an incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
R Base unit:
To turn the ringer off, press and hold MCN
until the unit beeps.
n
Programming the volume beforehand:
1
MMENUN#160
2
MbN: Select the desired volume. a MSAVEN
3
Proceed with the operation for your unit.
Base unit: MnN (EXIT)
Handset: MOFFN
Temporary ringer off
Base unit / Handset
While the unit is ringing for a call, you can turn the
ringer off temporarily by pressing M N.
Useful features during a call
Hold
This feature allows you to put an outside call on
hold.
Base unit
1
Press MHOLDN during an outside call.
R If you are using the corded handset, you
can place it on the cradle.
2
To release hold, lift the corded handset or
press M N.
R A handset user can take the call by
pressing M
N.
Handset
1
Press MMENUN during an outside call.
2
MbN: “Hold” a MSELECTN
3
To release hold, press M
N.
R The base unit user can take the call by
lifting the corded handset.
R Another handset user can take the call by
pressing M
N.
Note for base unit and handset:
R If a call is kept on hold for more than 9 minutes,
an alarm tone starts to sound and the ringer
indicator on the handset flashes rapidly. After 1
additional minute on hold, the call is
disconnected.
14
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls