AT&T 1856 Speakerphone - Manual (Page 8)

Getting started
Telephone base installation
NOTES:
1. Use only the power adapter supplied with this product or equivalent. To order a
replacement power adapter, visit our website at
www.telephones.att.com
,
or call
1 (800) 222-3111
. In Canada, dial
1 (866) 288-4268
.
2. Be sure to use an electrical outlet not controlled by a wall switch.
3. This power adapter is intended to be correctly oriented in a vertical or floor
mount position.
Install the telephone as shown below. Choose a location where the telephone is
not exposed to excessive heat, cold, dust or moisture.
4. Plug the other end of the tele-
phone line cord into a telephone
jack.
5. Plug the large end of the
power adapter into an electri-
cal outlet not controlled by a
wall switch.
3. Route cords through slots.
1. Plug one end of the telephone
line cord into the telephone jack
at the back of the telephone.
2. Plug the small end of the
power adapter into the power
jack at the back of the tele-
phone.
1 2
3
4
5
5