Sony MZ-R90 - Manual (Page 36)

36
5
Repeat step 4 and enter all characters
of the label name.
To cancel labeling, press DISPLAY
for 2 seconds or more.
6
Keep pressing the x for 2 seconds or
more.
The track or disc is labeled.
Labeling a track during
playback
1
Insert a disc and play the track you
want to label.
2
Press DISPLAY for 2 seconds or
more.
“
: Name” flashes in the display.
3
Press x.
The track is ready to be labeled.
4
Follow steps 4 to 6 of “Labeling a
disc during stop” (page 35).
Labeling a track or a disc
during recording
1
Press DISPLAY for 2 seconds or
more during recording.
“
: Name” flashes in the display.
2
To label a track, press x.
To label a disc, press the control
towards . or towards N • >
until “
: Name” flashes in the
display, then press x.
The track or disc is ready to be
labeled.
3
Follow steps 4 to 6 of “Labeling a
disc during stop” (page 35).
To cancel labeling, press DISPLAY for
2 seconds or more.
Note
When the recording is stopped while labeling a
track or a disc during recording, or when the
recording moves on to the next track while
labeling a track, the input at that point is entered
automatically.
Available characters
• Capital and small letters of the English
alphabet
• Numbers 0 to 9
• !
" # $ % & ( ) * . ; < = > ?
@ _ ` + – ' , / : _ (space)
Relabeling recordings
Follow the steps corresponding to the
labeling method until the disc or track is
ready to be labeled. Enter a new character
over the one you want to change, then
press the jog lever (keep pressing x for 2
seconds or more on the remote control).
Notes
• You cannot relabel premastered MDs or label
MDs that have not been recorded.
• The recorder is able to display, but cannot
label using Japanese “Katakana” characters.
• The recorder cannot rewrite a disc or track
name of more than 200 letters that was created
by another device.
DISPLAY Insert a blank space
to type in a new
letter by pressing
within 2 seconds.
Cancel labeling by
pressing for 2
seconds or more.
PLAYMODE Delete a letter and
move back all
following letters to
the left.
1) If phrases are stored in the phrase bank,
the first phrase stored appears in the
display(page 39).
Press/ Turn To