Sony NEX-7K - Manual (Page 71)

71 GB
Ta
ble
of
co
nt
e
n
ts
Sa
mp
le
pho
to
Me
nu
In
dex
Shutter Priority
You can express the movement of a moving subject in various way by adjusting the
shutter speed, for example, at the instant of the movement with high speed shutter, or as
a trailing image with low speed shutter. You can adjust the shutter speed also during
movie recording.
1 MENU t [Shoot Mode] t [Shutter Priority].
2 Select the desired value with the control dial L.
3 Adjust the focus and shoot the subject.
The aperture is automatically adjusted to obtain proper exposure.
You can set the exposure compensation with the control dial R, and ISO with the control
wheel.
• You cannot select [Flash Off] and [Autoflash] in [Flash Mode]. When you want to fire the flash, press the
(flash pop-up) button to pop up the flash. When you do not fire the flash, push down the flash.
• The (SteadyShot warning) indicator is not indicated in shutter speed priority mode.
• When the shutter speed is 1 second or more, noise reduction (Long Exposure NR) will be done for the
same amount of time that the shutter was open after shooting. You cannot do any further shooting during
the reduction.
• If proper exposure cannot be obtained after the setup, when you press the shutter button halfway down,
the aperture value blinks. Although you can shoot as it is, resetting is recommended.
• The brightness of the image on the LCD monitor may differ from the actual image being shot.
• When using an A-mount lens (sold separately), you can adjust the shutter speed when focusing manually
during movie recording.
Notes
z
Shutter speed
When a faster shutter speed is used, a moving subject such as a
running person, cars, and sea spray appears as if they are
stopped.
When a slower shutter speed is used, a trailing image of the
movement of the subject is captured to make more natural and
dynamic image.