Sony DSC-S40 - Manual (Page 50)

50
For details on the operation
t
page 41
Setup 2
2
The default settings are marked with .
Selects the method used to assign file numbers to images.
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the USB cable.
Sets the date and time.
File Number
Series Assigns numbers to files in sequence even if the recording
folder or the “Memory Stick” is changed. (When the replaced
“Memory Stick” contains a file with a number higher than the
last assigned number, a number one higher than the largest
number is assigned.)
Reset Starts from 0001 each time the folder is changed. (When the
recording folder contains a file, a number one higher than the
largest number is assigned.)
USB Connect
PictBridge Connects the camera to a PictBridge compliant printer (page
65).
PTP When [PTP] (Picture Transfer Protocol) is set and the camera
is connected to a computer, the images in the recording folder
selected by the camera are copied to the computer.
(Compatible with Windows XP and Mac OS X.)
Normal Connects the camera to a computer (page 54).
Clock Set
OK Select [OK] with v on the control button, and press z. Then,
perform the procedure explained in “Set the clock” (
t step 2
in “Read This First”).
Cancel Cancels setting the clock.