Sony PCG-FX410 - Manual (Page 37)

Using Power Saving Modes
37
To activate Hibernate mode
1 To activate Hibernate mode, press the key combination Fn+F12, or press the
power button and release it immediately. The “Save to Disk Manager”
screen appears and the notebook enters Hibernate mode.
2 Press on the power button to return to normal mode.
Notes on power saving modes
❑ When returning from Hibernate mode, the system status stored on the hard
disk is erased and the notebook starts normally if you press the power button
and hold it for more than four seconds.
❑ Standby uses more power than Hibernate.
❑ Standby requires less time than Hibernate to return to normal mode.
✍
Do not move the notebook until its power indicator turns off.