Sony SRS-X5 - Manual (Page 75)

Personal Audio System
SRS-X5
Making a call
You can enjoy a hands-free call with a BLUETOOTH mobile phone that supports the BLUETOOTH profile HFP (Hands-
free Profile) or HSP (Headset Profile), via a BLUETOOTH connection.
If your BLUETOOTH mobile phone supports both HFP and HSP, set it to HFP.
Operations may vary depending on the BLUETOOTH mobile phone. Refer to the operating instructions supplied with
your mobile phone.
1. Connect the speaker with a BLUETOOTH mobile phone.
The (BLUETOOTH) indicator lights up in white when the BLUETOOTH connection is established.
2. Operate the BLUETOOTH mobile phone to make a call.
When you make a call, playback pauses and the dial tone is heard from the speaker. When the receiver takes the
call, talk into the microphone of the speaker.
If no dial tone is heard via the speaker
The speaker may not connect with a BLUETOOTH mobile phone with HFP or HSP. Check the connection status
on the BLUETOOTH mobile phone.
Switch the call device to the speaker by pressing and holding the (call) button for about 2 seconds.
3. Tap the VOL (volume) -/+ buttons to adjust the volume.
When you tap the VOL (volume) -/+ buttons, the (power) indicator flashes once in green.
When you tap the VOL (volume) –/+ buttons at the lowest or highest level, the (power) indicator flashes 3
times in green.
Help Guide
How to Use
75