Sony SRS-X5 - Manual (Page 53)

Personal Audio System
SRS-X5
Pairing and connecting with a BLUETOOTH device
The speaker can be paired with up to 8 BLUETOOTH devices.
When pairing with 2 or more BLUETOOTH devices, perform the following pairing procedure for each device.
Before operating the speaker, be sure to do the following:
Place the BLUETOOTH device within 1 m (3 ft) of the speaker.
Connect the speaker to the AC outlet or charge the battery sufficiently.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
1. Turn on the speaker.
The (power) indicator lights up in green.
2. Tap the (BLUETOOTH) PAIRING button.
The (BLUETOOTH) indicator begins to flash in white.
From the factory, pairing information is not stored in the speaker. In this case, if you only tap the
(BLUETOOTH) PAIRING button, the (BLUETOOTH) indicator will begin to flash quickly in white and the
speaker enters pairing mode automatically.
When you tap the (BLUETOOTH) PAIRING button, the speaker tries to make BLUETOOTH connection
with the last connected BLUETOOTH device. If the device is nearby, the BLUETOOTH connection is established
automatically and the (BLUETOOTH) indicator stays lit. When you want to connect another BLUETOOTH
device, terminate the current BLUETOOTH connection by operating the currently connected BLUETOOTH
device.
3. Tap and hold the (BLUETOOTH) PAIRING button until beeps are heard and the (BLUETOOTH) indicator
begins to flash quickly in white.
The speaker enters pairing mode.
Help Guide
How to Use
53