Sony SRS-X5 User Manual
Page 74
3. Tap the VOL (volume) -/+ buttons to adjust the volume.
When you tap the VOL (volume) -/+ buttons, the
(power) indicator flashes once in green.
When you tap the VOL (volume) –/+ buttons at the lowest or highest level, the
(power) indicator flashes three
times in green.
4. To end a call, press the
(call) button.
If you were listening to music when the call arrived, playback will be resumed when the call ends.
Hint
Some BLUETOOTH mobile phones have handset use priority when receiving a call. In the case of the HFP or HSP
connection, talk on the speaker by pressing and holding the
(call) button for about 2 seconds, or by using your
BLUETOOTH mobile phone.
If you adjust the volume on the speaker when not talking, the playback volume is adjusted.
If the caller cannot hear or can barely hear your voice, talk more directly into the microphone of the speaker.
During a call, tap the VOL (volume) -/+ buttons on the speaker to adjust the volume. In the speaker, the volume of
music playback and calling is set independently.
Note
The sound is output from the left speaker only during a call.
Depending on the BLUETOOTH mobile phone, playback may not pause when an incoming call arrives.
Use a BLUETOOTH mobile phone at least 50 cm from the speaker. Noise may result if the speaker and the
BLUETOOTH mobile phone are too close.
Related Topic
How to make wireless connection with BLUETOOTH devices
Terminating the BLUETOOTH connection (After use)
Button functions for a phone call
Making a call while playing back music (Multi point connection)
4-534-948-11(1)
Copyright 2014 Sony Corporation
74