Peripheral devices are not recognized, I cannot play music (audio player), Playing music – Sony PEG-NZ90 User Manual
Page 36: There is no sound, The sound is too low, The sound is noisy
36
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Peripheral devices are not recognized
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I cannot play music (Audio Player)
Playing music
B After you turn off your CLIÉ handheld, remove the peripheral device or
the network card and reconnect it.
B For the latest information on peripheral devices and network cards
supported by your CLIÉ handheld, refer to the website below and select
your model.
http://www.sony.com/peg/support/
There is no sound
B Increase the volume.
B Check that the volume is not set to the Muting mode.
b
For details, refer to “My CLIÉ handheld is not making any sounds” on page 14.
The sound is too low
B Tap AVLS and switch to the normal display.
The sound is noisy
B If you are using other applications of your CLIÉ handheld and processing
the data when playing the music, there will be some noise.