Sony PEG-NZ90 - Manual (Page 14)

14
B The CLIÉ handheld is placed near the IR port of your computer.
Move your CLIÉ handheld away from the IR port of your computer
except when performing an IR HotSync
®
operation, as a malfunction
may occur. You can also disable the IR feature by setting Beam
Receive to Off from General in the Preferences screen.
B Perform a soft reset by pressing the reset button.
b For details, refer to “Basic operations of your Sony CLIÉ™ handheld:
Restarting your Sony CLIÉ handheld” in the “Read This First (Operating
Instructions).”
My CLIÉ handheld keeps turning itself off
B Your CLIÉ handheld is designed to turn itself off after a period of
inactivity (Automatic power-off). You can set the automatic power-off
time by tapping General-Auto-off After in the Preferences screen.
b For details, refer to “Customizing your Sony CLIÉ™ handheld (Preferences):
Setting the automatic
power -off time” in the “Handbook.”
B Do you set Auto Lock Handheld to After a preset delay in the
Security screen?
When you set Auto Lock Handheld to After a preset delay, your
CLIÉ handheld may turn off after a shorter period even if you set the
automatic power-off time.
b For details, refer to “Protecting your data with a password: Locking your CLIÉ
handheld with a password (Data protection)” in the “Handbook.”
My CLIÉ handheld is not making any sounds
B Tap General in the Preferences screen and check that System Sound
is not set to Off.
b For details, refer to “Customizing your Sony CLIÉ™ handheld (Preferences):
Setting sounds” in the “Handbook.”
Tip
You can also adjust the volume settings by tapping the Adjust Volume icon in the status bar.
b
For details, refer to “Basic operations of your Sony CLIÉ™ handheld: Locating the
components of the initial screen: Status Bar” in the “Read This First (Operating Instructions).”
My CLIÉ handheld is not responding