Sony PEG-NZ90 - Manual (Page 34)

34
My CLIÉ handheld cannot read data on a “Memory Stick”
media
B When you use the installation tool in the Palm™ Desktop for CLIÉ
software to save data on a “Memory Stick” media, the data will be stored
in the folder “/PALM/Launcher.” However, you cannot locate the folder
with some applications on your CLIÉ handheld. In this case, copy the data
from the “Memory Stick” media to your CLIÉ handheld using the “CLIE
Files” application.
b For details about reference folders of each application on a “Memory Stick”
media, refer to “About files stored on “Memory Stick” media” in the “CLIÉ
Application Manual” installed on your computer.
For any third-party application, contact the developer of the software.
Use “Memory Stick Import”/“Memory Stick Export” application to install
data from your computer to “Memory Stick” media.
My CLIÉ handheld does not recognize a “Memory Stick”
media or an error occurs
B Eject the “Memory Stick” media and try inserting it again.
B If the terminal part of the “Memory Stick” media is dirty, your CLIÉ
handheld cannot read the data. Wipe the terminal with a soft cloth, such as
a cotton pad.
B You cannot use a “Memory Stick” media that is formatted in a device other
than your CLIÉ handheld. Please format it on your CLIÉ handheld.
B When the battery of your CLIÉ handheld is running low, data on a
“Memory Stick” media may not be displayed. Recharge the battery of your
CLIÉ handheld.