Sony PCV-E518DS - Manual (Page 42)

VAIO Digital Studio Reference Manual 34
9 If necessary, remove any add-in cards (see “Removing an Add-in
Card” on page 31) to gain access to the battery. You may also need to
disconnect some cables.
10
Insert a small flathead screwdriver into the small space at the top of
the battery holder.
11
Gently pry the battery out and dispose of it according to the
instructions that came with the new battery.
12
Insert the new battery into the battery holder, with the plus (+) side
up.
13 Replace any add-in cards that were removed.
14 Reconnect any cables that were disconnected.
15
Replace the bottom panel (see “Replacing the Bottom Panel” on
page 28).
16 Replace the left side panel (see “Replacing the Left Side Panel” on
page 29).
17
Reconnect the power cord and turn on the computer.
!
Touch any exposed metal part of chassis to discharge static electricity in
your body before handling an add-in card or other sensitive electronic
component.
✍
The Sony CR2032 battery is recommended. Using a type of battery other than a
CR2032 may present a risk of fire or explosion.
KY0072.VSD