Sets whether to use the upload function of an Eye-Fi card (commercially available), when you use the
Eye-Fi card with this camera. [Eye-Fi] is displayed only when the Eye-Fi card is inserted in the camera.

1. MENU

(Settings)

(Main Settings)

[Eye-Fi]

desired mode

Uses the upload function.

The Eye-Fi mode display icon on the screen will change depending on the communication

mode of the Eye-Fi card.

Eye-Fi card is in standby mode. There is no image to be sent.

Eye-Fi card is in upload standby mode.

Eye-Fi card is in connecting mode.

Eye-Fi card is uploading images.

An error has occurred.

Off Does not use the upload function.

Notes

As of November 2011, Eye-Fi cards are sold in the U.S.A., Canada, Japan and some countries in
the European Union.
For more information on the Eye-Fi card, contact the manufacturer or seller of Eye-Fi cards directly.
Eye-Fi cards are permitted only in the countries and regions in which they were purchased. You
may be held liable due to local restrictions.
The Eye-Fi card has a wireless LAN function. Do not insert the Eye-Fi card where wireless LAN is
prohibited, such as while aboard an airplane. If the Eye-Fi card is inserted, set [Eye-Fi] to [Off].
When the uploading function of the Eye-Fi card is set to [Off],

is displayed on the screen.

Transferring image data using the Eye-Fi card

1. Set the wireless LAN access point settings or the transferring direction settings of the Eye-Fi card.

For details, refer to the operating instructions supplied with the Eye-Fi card.

2. After the settings are finished, insert the Eye-Fi card into the camera, and shoot the images.

The recorded images are automatically transferred via the wireless LAN to the PC, etc.

Notes

When uploading image data, [Eco Mode] is not available.
If the

(error) icon is displayed, eject and re-insert the Eye-Fi card, or turn the power of the

camera off and on again. If the

(error) icon is still displayed, the Eye-Fi card may be corrupted.

For details, contact Eye-Fi, Inc.
Wireless LAN communication may be interrupted by the other communication devices. If data
reception is insufficient, move the camera closer to the access point.
Some Eye-Fi cards have an “Endless Memory Mode.” This product does not support “Endless
Memory Mode.” Make sure that Eye-Fi cards that you insert into this product have “Endless
Memory Mode” turned off. For details on setting “Endless Memory Mode”, refer to the operating
instructions supplied with the Eye-Fi card.

131

This manual is related to the following products:

DSC-W650