Sony MHC-RG70AV - Manual (Page 12)

12
3
Press one of DISC 1 – 3 to select a CD.
To program all the tracks on a CD at once,
proceed to step 5 with “AL” displayed.
4
Press . or > until the desired
track appears in the display.
Disc tray number
Total playing time
(including selected track)
Track number
5
Press ENTER.
The track is programed. The program step
number appears, followed by the total
playing time.
6
Program additional discs or tracks.
To program Repeat steps
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press CD,
then press hH (or nN on the remote).
• “--.--” appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.
Using the CD display
You can check the remaining time of the
current track or the entire CD.
Press DISPLAY (or DSP on the remote)
repeatedly.
During normal play
Elapsed playing time of the current track t
Remaining time of the current track t
Remaining time of current CD (1DISC mode)
or “--.--” display (ALL DISCS mode)
t
Clock display (for eight seconds) t Effect
status
In stop mode
During Program Play mode when there is a
program:
The last track number of the program and the
total playing time
t Total number of
programed tracks (for eight seconds) t Clock
display (for eight seconds) t Effect status
Other discs 3 and 5
Other tracks on the
same disc 4 and 5
Other tracks on other
discs 3 to 5
7
Press hH (or nN on the remote).
Other Operations
To Do this
Cancel Program
Play Press PLAY MODE repeatedly
in stop mode until “PROGRAM”
and “SHUFFLE” disappear.
Clear a track from
the end Press CLEAR on the remote in
stop mode.
Clear the entire
program Press x once in stop mode or
twice during play.
Programing CD tracks (continued)