Sony PHC-Z10 - Manual (Page 39)

Additional Information 39
Troubleshooting
Radio
Symptom
There is no audio.
“SP CHECK” appears in the display.
Noise is heard.
“NO DISC“ lights in the display
even when a CD is in place.
The CD does not play.
The sound drops out.
The audio is weak or has poor
quality.
The picture of your TV becomes
unstable.
General
Remedy
• Press POWER to turn on the player.
• Connect the AC power cord to a wall outlet
securely.
• Make sure the function you want to use appears
in the display window.
• Adjust the volume.
• Unplug the headphones when listening through
speakers.
• The speaker cords are short-circuited. Twist the
wires and connect them to the terminals.
• Someone is using a portable telephone or other
equipment that emits radio waves near the
player.
t Move the portable telephone, etc.,
away from the player.
• Insert the CD with the label surface up.
• Make sure that the CD tray is closed.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD tray open for
about an hour to dry moisture condensation.
• Make sure “CD” appears in the display
window.
• Reduce the volume.
• Clean the CD, or replace it if the CD is badly
damaged.
• Place the player in a location free from
vibration.
• The sound may drop out or noise may be heard
if the CD is recorded using a personal computer
(CD-R, etc.).
• Move the player away from the TV.
• If you are using the remote while listening to
AM radio, noise may be heard. This is
unavoidable.
• If you are listening to an FM program near the
TV with an indoor antenna, move the player
away from the TV.
CD Player
continued