beautypg.com

Warning indicators – Sony VPL-VW95ES User Manual

Page 72

background image

72

The ON/STANDBY or LAMP/COVER indicator lights up or flashes if there is any
trouble with your projector.

Warning Indicators

Symptom

Cause and Remedy

LAMP/COVER flashes in
red. (A repetition rate of 2
flashes)

c Close the lamp cover securely, then tighten the screws securely

(

1 page 76).

c Close the filter holder securely (1 page 77).

LAMP/COVER flashes in
red. (A repetition rate of 3
flashes)

c The lamp has reached the end of its useful lifespan. Replace the

lamp (

1 page 75).

c The lamp has reached a high temperature. Wait until the lamp

cools, and then turn on the power again.

ON/STANDBY flashes in
red. (A repetition rate of 4
flashes)

c The fan is broken. Consult with qualified Sony personnel.

ON/STANDBY flashes in
red. (A repetition rate of 2
flashes)

c The internal temperature is unusually high. Check to ensure that

if nothing is blocking the ventilation holes or whether or not the
projector is being used at high altitudes.

ON/STANDBY flashes in
red. (A repetition rate of 6
flashes)

c Press the

?

/

1

(ON/STANDBY) switch to turn on the projector. If

the power is not turned on, disconnect the AC power cord, then
confirm the ON/STANDBY lamp is turned off. After about 10
seconds, reconnect the AC power cord and turn on the power
again. If the indicators still light up, the electrical system has a
problem. Consult with qualified Sony personnel.

ON/STANDBY indicator

LAMP/COVER indicator