Sony MXD-D40 - Manual (Page 37)

37
Editing Recorded MDs
Erasing all titles on an MD (Name All Erase
Function)
Use this function to erase all titles on an MD
simultaneously.
1
While the deck is stopped, playing, or pausing,
press MENU/NO to display “Edit Menu.”
2
Turn AMS to select “Name ?”, then press AMS or
YES.
3
Turn AMS to select “Nm AllErs?”, then press
AMS or YES.
“Nm AllErs??” appears in the display.
4
Press AMS or YES again.
“Complete!” appears for a few seconds and all
titles are erased.
To cancel the Name All Erase Function
Press MENU/NO or p.
z
You can undo the Name Erase Function and the
Name All Erase Function
See “Undoing the Last Edit” on this page.
z
You can erase all recorded tracks and titles
See “Erasing all tracks on an MD” on page 29.
Undoing the Last Edit (Undo
Function)
You can use the Undo Function to cancel the last edit
and restore the contents of the MD to the condition that
existed before editing was done. Note, however, that
you cannot undo an edit if you do any of the following
after the edit:
• Do another edit.
• Press REC
r on the front panel of the deck or
otherwise perform the recording operation.
• Update the TOC by turning off the deck or ejecting
the MD.
• Disconnect the AC power cord.
You cannot undo the S.F Edit Function even if you use
the Undo Function.
AMS
MENU/NO YES
1
With the deck stopped and no track number
appearing in the display, press MENU/NO to
display “Edit Menu.”
2
Turn AMS until “Undo ?” appears in the display.
“Undo ?” does not appear if no editing has been
done.
(Continued)