Sony DSC-T30 - Manual (Page 92)

92
Smart zoom does not function.
• Set [Digital Zoom] to [Smart] (page 52).
• This function cannot be used when:
– The image size is set to [7M] or [3:2].
– Shooting in Multi Burst mode.
– Shooting movies.
The flash does not work.
• The flash is set to (Flash forced off) ( t step 5 in “Read This First”).
• You cannot use the flash when:
– [Mode] (REC Mode) is set to [Burst], [Exp Brktg] or [Multi Burst] (page 42).
– (High sensitivity mode), (Twilight mode) or (Fireworks mode) is selected in the
Scene mode (page 29).
– When the mode switch is set to .
• Set the flash to (Flash forced on) when (Magnifying Glass) is set, or (Landscape
mode), (Snow mode), (Beach mode) or (High-speed shutter mode) is selected in
the Scene mode ( t step 5 in “Read This First”).
Fuzzy specks appear in images shot using the flash.
• Dust in the air reflected the flash light and appeared in the image. This is not a malfunction.
The close-up shoot function does not work.
• (Twilight mode), (Landscape mode) or (Fireworks mode) is selected in the Scene
mode (page 29).
The date and time are not displayed.
• While shooting, the date and time are not displayed. They are displayed only during playback.
The date and time are recorded incorrectly.
• Set the correct date and time ( t step 2 in “Read This First”).
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
• The exposure is incorrect. Correct the exposure (page 37).
The image is too dark.
• You are shooting a subject with a light source behind the subject. Select the metering mode
(page 40) or adjust the exposure (page 37).
• The brightness of the screen is too low. Adjust the brightness of the LCD backlight (page 23).