Sony MXD-D400 - Manual (Page 39)

M
D
–
E
d
it
in
g
39 GB
You can use this function to combine 2 tracks
into a single track. The total number of tracks
decreases by one and all tracks following the
combined ones are renumbered.
Example: Combining track 3 to track 1
Example: Combining track 1 to track 4
1
Set to MD in CD MD select switch.
2
Press MENU/NO.
3
Press . or > repeatedly (or turn
AMS) until “Combine?” appears, then
press YES (or AMS).
Playback starts.
4
Press . or > repeatedly (or turn
AMS) until the first track number of the
two to be combined appears, then
press YES (or AMS).
For example, to combine track 1 to 4, select
4.
5
Press . or > repeatedly (or turn
AMS) until the second track number of
the two to be combined appears.
6
Press YES (or AMS).
“Complete!” appears for a few seconds.
Playback of the track starts.
Notes
• When you combine two tracks that are registered into
different groups, the second track is reregistered into
the group containing the first track. In addition, if
you combine a track that is registered to a group with
a track that is not registered to a group, the second
track takes the same registration setting as the first
track. However, when the Group Function is on, you
can only combine tracks within the selected group.
• Tracks recorded in different recording modes (stereo,
LP2, LP4 or MONO) cannot be combined.
• If both of the combined tracks have track titles, the
title of the second track is erased.
Combining recorded
tracks
— Combine Function
Track number
Original
tracks
After
COMBINE
A B C D
A C B D
Original
tracks
After
COMBINE
Track number
A B C D
B C D A
Second track
number to be
continued
First track number