Sony MXD-D400 - Manual (Page 35)

M
D
–
E
d
it
in
g
35 GB
To register tracks into a group
In step 6, press . or > repeatedly (or
turn AMS) to select the number of the first
track you want to register, then press YES
(or AMS).
When registering only one track, press YES
again. When registering two or more tracks,
press . or > (or turn AMS) repeatedly to
select the number of the last track you want to
register, then press YES (or AMS).
Notes
• You cannot register the same track to more than one
group.
• If you do not enter a group title in step 5, “Group **
(group number)” appears as the group title.
Tip
You can also register tracks that were recorded on a
deck that does not support the Group Function.
These functions allow you to release group
registrations simply by specifying the group for
which you want to release the registrations. In
addition, you can also release the registrations of
all groups on an MD at once.
For details on the group management
information, see “Registering tracks in groups”
on page 31.
Releasing a single group
— Group Release Function
You can release a specified group and erase that
group. (However, note that the tracks are not
erased.)
1
Set to MD in CD MD select switch.
2
Press GROUP ON/OFF repeatedly until
“GROUP ON” appears.
3
Press ALBUM/GROUP – or + (or
GROUP SKIP) repeatedly until the
desired group appears.
4
Press MENU/NO.
Releasing group
registrations
— Release Function
3
5
2
5,6
1
4
continued