Sony MXD-D400 - Manual (Page 38)

38 GB
6
Press YES (or AMS) if point A is
correct.
“Point B set” appears and playback for
setting the ending point of the portion to be
erased (point B) starts.
If the point A is incorrect, press m or
M repeatedly to flash minute, second, or frame
indication, then press . or > (or turn
AMS).
You can shift the point by 1/86 second
(1 frame) intervals.*
* You can shift the point by 2-frame intervals (in
Monaural mode and LP2 stereo mode) or by
4-frame intervals (in LP4 stereo mode).
7
Continue playback until the deck
reaches point B, then press YES (or
AMS).
“A-B Ers” and “Point B ok?” appear
alternately and the deck repeats a portion of
the few seconds before point A and after
point B successively.
8
Press YES (or AMS) if point B is
correct.
“Complete!” appears for a few seconds and
the portion between point A and B is erased.
Playback starts from the beginning of the
track.
If the point B is incorrect, press m or
M repeatedly to find the ending point of
the portion to be erased (point B) while
monitoring the sound, then press YES (or
AMS).
You can shift the point by 1/86 second
(1 frame) intervals.*
* You can shift the point by 2-frame intervals (in
Monaural mode and LP2 stereo mode) or by
4-frame intervals (in LP4 stereo mode).
You can use this function to change the order of
any track on the disc. When you move tracks,
the tracks are automatically renumbered.
Example: Moving track 3 to position 2
1
Set to MD in CD MD select switch.
2
Press MENU/NO.
3
Press . or > repeatedly (or turn
AMS) until “Move?” appears, then
press YES (or AMS).
Playback starts.
4
Press . or > repeatedly (or turn
AMS) until the desired track number to
move appears, then press YES (or
AMS).
5
Press . or > repeatedly (or turn
AMS) until the new track position
appears.
6
Press YES (or AMS).
“Complete!” appears for a few seconds and
the moved track starts playing.
Note
When you move a track to a track number that is
registered into a group, the moved track is re-registered
into the group. In addition, if you move a track that is
registered into a group to a track number that is not
registered into a group, the group registration of the
moved track is released. However, when the Group
Function is on, you can only move tracks within the
selected group.
Second Minutes Frame
Moving recorded tracks
— Move Function
Track number
Original
tracks
After
MOVE
A B C D
A C B D
Original track
number New track
position