Sony VPL-BW120S - Manual (Page 16)

16
Connecting the Projector
B Preparation
Connecting the Projector
• Make sure all the equipment is powered off when connecting the projector.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or
cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.
• For more information, refer also to the instruction manuals of the equipment you are connecting.
• Use a no-resistance audio cable.
Connection with a computer is explained for each input signal.
INPUT A
For connecting a computer with an RGB output connector.
It is recommended that you set the resolution of your computer to 1280 × 800 pixels for the external
monitor.
Notes
Connecting a Computer
Note
Mini D-sub 15-pin cable (not supplied)
Audio cable (Stereo mini plug) (not supplied)
RGB output
connector
Audio output
connector
Computer