Sony MZ-NF810 - Manual (Page 43)

43
Fuse Replacement
If the recorder does not operate, check the fuse. If it is blown, replace it as follows:
1
Turn off the recorder and remove the cigarette lighter plug from the cigarette lighter
socket.
2
Remove the plug end by turning it counterclockwise.
3
Remove the defective fuse from the plug.
4
Insert a new fuse into the plug.
5
Replace the plug end by turning it clockwise.
Notes
• Be sure to use a fuse of the same amperage and length as the one to be replaced. Never use a piece of
wire as a substitute for the fuse.
• If the fuse is blown again after it is replaced, contact your nearest Sony dealer. When visiting the
dealer, take the defective fuse with you.
Plug end
Remove
Fuse
Cigarette lighter plug