Sony DSC-L1 - Manual (Page 63)

63
DSC-L1 2-186-455-11(1) [OpenType FONT]
Advanced still image viewing
 Set the mode switch to , and
display the image to rotate.
 Press MENU.
The menu appears.
 Select (Rotate) with /,
then press .
 Select with , then rotate
the image with /.
 Select [OK] with /, then
press .
To cancel rotation
Select [Cancel] in step  or , then
press .
• You cannot rotate protected images and movies
and Multi Burst images.
• You may not be able to rotate images shot with
other cameras.
• When viewing images on a computer,
the image rotation information may not
be reflected depending on the application
software.
Playing back images
shot in Multi Burst
mode
You can play back Multi Burst images
continuously or play them back frame by
frame. This function is used for checking
the image.
Mode switch
Control button
• When Multi Burst images are played back on
a computer or on a camera without the Multi
Burst function, the 16 frames you shot will
be displayed at the same time as part of one
image.
• You cannot cut the Multi Burst image.
Playing back continuously
 Set the mode switch to .
 Select the Multi Burst image
with /.
The selected Multi Burst image is
played back continuously.
10:30 PM 2005 1 1 101-0014
14 / 14 101
M
PAUSE BACK/NEXT VOLUME
60min
To pause playback
Press . To resume playback, press 
again. The playback starts from the frame
displayed on the LCD screen.