Adjusting the flash level, Flash level, Shooting continuously – Sony DSC-L1 User Manual
Page 57
57
DSC-L1 2-186-455-11(1) [OpenType FONT]
Advanced still image shooting
Adjusting the flash
level
— Flash Level
You can adjust the amount of flash light.
Before operation
Set
(Camera) in the menu to other than
[Auto] (pages 46 and 109).
MENU
Mode switch
Control button
Set the mode switch to .
Press MENU.
The menu appears.
Select [ ] (Flash Level) with
/, then select the desired
setting with
/.
+: Makes the flash level higher than
normal.
Normal: Normal setting.
–: Makes the flash level lower than
normal.
• You may not be able to set the flash level a
depending on the Scene Selection mode (page
39).
Shooting
continuously
This mode is used for continuous shooting.
The maxium number of images you can
shoot per one shooting depends on the
image size and image quality settings.
MENU
Mode switch
Shutter button
Control button
• When the battery power decreases with use or
the capacity of the “Memory Stick Duo” is full,
recording stops even if you press and hold the
shutter button.
Set the mode switch to .
Press MENU.
The menu appears.
Select [Mode] (REC Mode)
with
/, then select [Burst]
with
/.