Sony PCG-R505JS - Manual (Page 36)

Change text in this variable definition to document title.
36
Connecting to a LAN
You can connect your notebook to 10Base-T and 100Base-TX-type Local Area
Networks (LANs). For the detailed settings and devices needed to connect to the
network, please ask your network administrator.
To set up your Ethernet connection
To connect to the network
1 Click Start in the Windows® taskbar, select My Computer, and click My
Network Places under the Other Places header.
2 Click “Add a network place” under the Network Tasks header, or click “Set
up a home or small office network,” depending on your configuration.
3 Depending on your choice, either The Add Network Place Wizard or
Network Setup Wizard is displayed.
4 Follow the step-by-step instructions that appear on the screen.
Connecting to LAN
Warning: Only connect 10Base-T and 100Base-TX cables to the Ethernet
port. Do not connect any other type of network cable or any telephone line.
Connecting cables other than those listed above may result in an electric
current overload and could cause a malfunction, excessive heat, or fire in the
port. To connect the unit to the network, contact your network administrator.
Ethernet
Cable