AKG Acoustics WMS 40 - Manual (Page 60)

58 www.akg.com
One or several PS 4000 antenna splitters can
be used to set up complex systems with long
antenna cables, distributed antenna networks
for room sharing applications, or to feed the
signal from a single antenna pair to several
receivers.
The 220 MHz bandwidth guarantees the full
coverage of all channels available in the
WMS 4000 system. The processing and ampli-
fication of true diversity signals in combination
with various optionally available antennas
ensure maximum reliability of reception.
Highly visible LED displays provide a clear sta-
tus indication even from a distance. A gain
selector switch allows for optimum matching to
connected antenna cable lengths to ensure
optimum signal quality.
The PS 4000 antenna splitter features 2 BNC
antenna inputs and 4 diversity outputs on
8 BNC sockets as well as two additional BNC
sockets for daisy chaining several antenna
splitters. This allows you to implement com-
plex systems with 50 or more receivers.
Of course the PS 4000 can be powered cen-
trally via a PSU 4000 Power Supply Unit so
that it can also work as a remote powering unit
for active antennas. The required voltage is
supplied via the antenna cables, eliminating
the need for separate antenna power cables.
T
HE
I
NDESPENSABLE
C
OMPONENT FOR
L
ARGE
W
IRELESS
S
YSTEMS
AKG WMS 4000 ANTENNA SPLITTER
PS 4000 Antenna splitter
On/off switch
Lockable DC input
For the secure connection of local or central power supply
components, such as the PSU 4000.
2 BNC antenna inputs
For connecting active and passive antenna network
components.
2 daisy-chaining outputs
For connecting another antenna splitter.
8 BNC antenna outputs
For connecting up to 4 diversity receivers.
Power Indicator
Status display
Lets you check the current antenna
network status at a glance.
Switch for matching the RF level to the
connected cable length
Calibration switch for optimizing antenna
signal levels.
2 x BNC In, 8 x BNC Out, 2 x BNC Link, DC
AKG WMS PS 4000