AKG Acoustics WMS 40 - Manual (Page 41)

www.akg.com 39
Microphones for PT 400
C 411 L
C 416 L C 417 L C 419 L C 420 L C 444 L CK 77 WR L CK 77 WR L/P CK 97-C/L D 409 L MK GL CK 55 L LM 3 L C 477 WR L
For hints on how to use MicroMic Series products refer to pages 80 and 81.
Flexible Antenna
Maximum transmission reliability depends
on a direct line of sight from the transmit-
ter to the receiver. So be sure never to cover
the antenna with clothes or makeup.
Rugged mini XLR connector
Professional 3-pin mini XLR input for connecting
MicroMic Series or other head-worn microphones,
lavalier microphones, or instrument cables from AKG.
PT 400 Portable transmitter
Display
Indicates the selected frequency or preset as well as the
remaining battery capacity in hours.
Infrared Sensor
Setting up the transmitter is incredibly easy as frequency and
gain data is downloaded from the receiver via infrared trans-
mission.
0,1 ” jack for external mute switch
An external mute switch allows the user to mute the sig-
nal even if the transmitter is hidden beneath clothes.
Charging contacts
Convenient plug-in charging on the CU 400 charger is
cost efficient and friendly to the environment.
Input gain control
Sets the gain of the audio input stage.
Interchangeable color code labels
For identifying multichannel system transmitters.
Detachable belt clip
Battery compartment
The transmitter can be powered by a single AA
size dry or rechargeable battery.
Soft-touch finish
Soft-touch enamel reduces handling noise.
Frequency is being downloaded from the receiver Frequency preset Frequency in MHz
Battery status display Low battery capacity warning
LCD display
The LCD on the HT/PT 400 provides a clear readout of the
most important transmitter parameters. As soon as the
battery capacity drops to a critical level, a warning will
appear in the display. Simultaneously, the receiver will dis-
play the same warning and change the display back-
lighting to red.
AKG WMS PT 400 UHF