Alpine CDE-W203RI - Manual (Page 18)

16
-EN
2
-1 Press BAND/TA to select the desired treble centre
frequency.
10.0 kHz 12.5 kHz 15.0 kHz 17.5 kHz 10.0 kHz
Emphasises the displayed treble frequency ranges.
2
-2 * 2 Turn the Rotary encoder to select the desired
treble level (–7~+7).
You can emphasise the treble level.
3
Press and hold /ESC for at least 2 seconds to
return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
• The treble level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
Treble frequency settings adjusted for one source are effective for all
other sources (FM, MW (LW), CD, etc.).
• The function is inoperable when DEFEAT is set to ON.
*
2
The adjustment can also be made by pressing Rotary encoder. Refer
to “Adjusting Subwoofer Level/Bass Level/Treble Level/Balance
(Between Left and Right)/Fader (Between Front and Rear)/Defeat”
(page 15).
Adjusting the High Pass Filter
The High Pass Filter on this unit can be adjusted to suit your personal
taste.
1
Press SOUND repeatedly to select the HPF mode.
BASS TREBLE HPF BASS
2
Turn the Rotary encoder to select the desired HPF
frequency.
OFF 60 Hz 80 Hz 100 Hz
All frequencies above the selected cutoff are output.
3
Press and hold /ESC for at least 2 seconds to
return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
• The function is inoperable when DEFEAT is set to ON.
Turning Loudness On/Off
Loudness introduces a special low-and high-frequency emphasis at low
listening levels. This compensates for the ear’s decreased sensitivity to
bass and treble sound.
Press and hold Rotary encoder (LOUD) for at least
2 seconds to activate or deactivate the loudness mode.
• The function is inoperable when DEFEAT is set to ON.
Displaying the Text
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name and the tag, etc., while playing
MP3/WMA/AAC files.
Press VIEW.
The display will change every time the button is pressed.
• When the TEXT SCR is set to SCR MANU, press and hold VIEW for
at least 2 seconds, the current text will be scrolled one time (except
Radio mode).
The display in Radio mode:
If there is PS (Programme Service Name)
PS (Programme Service Name)* 1 CLOCK
RADIO TEXT PS (Programme Service Name)
If there is no PS (Programme Service Name)
FREQUENCY CLOCK RADIO TEXT FREQUENCY
The display in CD mode:
TRACK NO./ELAPSED TIME CLOCK
TEXT (DISC NAME)* 2 TEXT (TRACK NAME)* 2
TRACK NO./ELAPSED TIME
The display in MP3/WMA/AAC mode:
FILE NO./ELAPSED TIME FOLDER NO./FILE NO.
FILE NO./CLOCK FOLDER NAME FILE NAME
ARTIST NAME* 3 ALBUM NAME* 3 SONG NAME* 3
FILE NO./ELAPSED TIME
The display in AUX mode:
AUX NAME AUX NAME/CLOCK AUX NAME
The display in BT AUDIO mode:
The Following display will be shown only when a telephone or
Bluetooth Streaming device with Metadata capabilities is
correctly connected with a Bluetooth INTERFACE (Alpine
KCE-400BT) (Sold Separately). (For details on Bluetooth
INTERFACE, refer to the Owner’s Manual of KCE-400BT).
BT A*
3
/ELAPSED TIME BT A/CLOCK ARTIST NAME*
4
ALBUM NAME* 4 SONG NAME* 4 BT A/ELAPSED TIME
Setting the Treble Centre Frequency
Setting the Treble Level
Other Functions
SOURCE/ VIEW