Flash, Cyber-shot user guide – Sony DSC-H200 User Manual
Page 67
Search
Confirming the operation
method
Top page > Useful shooting functions > Using shooting functions > Flash
Flash
1. Press the flash unit pop-up button to raise the flash.
When the flash unit is not raised, the flash mode is set to
(Off) automatically. You cannot
change the setting.
2. Press (Flash) on the control button.
3. Select the desired mode with the control button.
(Advanced
Flash)
Flash to a farther distance by increasing the upper limit value of ISO
sensitivity.
(Auto)
Flash automatically operates in dark locations or when there is a backlight.
(On)
Flash always operates.
(Slow
Synchro)
Flash always operates.
The shutter speed is slow in a dark place to clearly shoot background that is
out of flash light.
When “White circular spots” appears in flash photos
These spots are caused by particles (dust, pollen, etc.) floating close to the lens. When they are
accentuated by the camera’s flash, they appear as white circular spots.
How can the “White circular spots” be reduced?
Light the room and shoot the subject without flash.
If you select
(High Sensitivity) mode in Scene Selection, [Flash] is automatically set to [Off].
Notes
The flash strobes twice. The first flash adjusts the light quantity.
While charging the flash,
is displayed.
You cannot use the flash during burst shooting.
(Advanced Flash) can be selected only in [Intelligent Auto] mode. When
(Advanced
Flash) is selected, the maximum size of [Still Image Size] is [5M]. If [Still Image Size] is set to larger
than [5M], [Still Image Size] is set to [5M] automatically.
When shooting with the flash and the zoom is set to W, the shadow of the lens may appear on the
screen, depending on the shooting conditions. If this happens, set the zoom to T and shoot with the
flash again.
When not using the flash, keep the flash down.
Related Topic
Functions available for each shooting mode
67