Batteries, Cyber-shot user guide – Sony DSC-H200 User Manual
Page 169

Search
Confirming the operation
method
Top page > Precautions/About this camera > Precautions > Batteries
Batteries
About the remaining battery charge
Batteries you can and cannot use with your camera
On alkaline batteries (supplied)
On Nickel-Metal Hydride batteries (sold separately)
On the battery
Avoid rough handling, disassembling, modifying, physical shock, or impact such as hammering,
dropping or stepping on the battery.
Do not use a deformed or damaged battery.
Do not mix a used battery together with a new battery or different types of batteries.
Remove the batteries from the camera when you do not operate the camera for long periods, or when
the batteries are dead.
About the remaining battery charge
A: High
B: Low
A remaining charge indicator appears on the screen.
It takes about one minute until the correct remaining charge indicator appears.
The remaining charge indicator may not be correct under certain circumstances.
When [Power Save] is set to [Standard] or [Max], if you do not operate the camera for a certain
period of time while the power is on, the screen becomes dark, then the camera turns off
automatically. (Auto power-off function)
Batteries you can and cannot use with your camera
In the table below,
indicates the battery can be used, while
indicates the one cannot be used.
Battery type
Supplied Supported Rechargeable
LR6 (size AA) alkaline batteries*
HR 15/51: HR6 (size AA) Nickel-Metal Hydride batteries*
Lithium batteries
Manganese batteries
Ni-Cd batteries
* Before using batteries, read the following precaution for each type of battery.
169