Sony STR-DA3400ES - Manual (Page 53)

D:\Cannes\STR-DA3400ES_U_R1\3289137121\3289137121\3289137121\01US-
STRDA3400ESUC\040PLA.fm masterpage: R-2
STR-DA3400ES
3-289-137-12(1)
53 US
P
lay
b
a
ck
Watching a DVD/Blu-ray Disc
DISPLAY
SLEEP
GUI MODE
2
3
6
6
3
MULTI CHANNEL DECODING lamp
• Refer to the operating
instructions supplied with the
TV and DVD player or Blu-ray
disc player.
• Check the following if you
cannot listen to the multi
channel sound.
– Be sure the sound source
corresponds to the multi
channel format (the MULTI
CHANNEL DECODING
lamp on the front panel lights
up during playback).
– Be sure this receiver is
connected to the DVD player
or Blu-ray disc player via a
digital connection.
– Be sure the digital audio
output of the DVD player or
Blu-ray disc player is set up
properly.
z
• Select the sound format of the
disc to be played, if necessary.
• You can select the sound field to
suit the movie or the music. See
page 63 for details.
1
Turn on the TV and DVD player or Blu-ray
disc player.
2
Turn on the receiver.
3
Press INPUT SELECTOR
U/u to select “DVD”
or “BD”.
You can also use INPUT SELECTOR on this receiver to
select “DVD” or “BD”.
4
Switch the input of the TV so that an image
of the DVD or Blu-ray Disc is displayed.
5
Play back the disc.
6
Adjust to a suitable volume.
7
After you have finished watching a DVD or
Blu-ray Disc, eject the disc and turn off the
receiver, the TV, and the DVD player or Blu-
ray disc player.