beautypg.com

Sony STR-DA3400ES User Manual

Page 136

background image

136

US

D:\Cannes\STR-DA3400ES_U_R1\3289137121\3289137121\3289137121\01US-
STRDA3400ESUC\110ADD.fm

masterpage: Left

STR-DA3400ES
3-289-137-12(1)

Video

There is no picture or an unclear
picture appears on the TV screen.

• Select the appropriate input on the receiver

(page 50).

• Set your TV to the appropriate input mode.
• Move your audio components away from

the TV.

• Assign the video input correctly.
• The input signal should be same as input

when you are up-converting an input
signal with this receiver (page 33).

The image of the COMPONENT VIDEO
OUT is corrupted.

• Video input signals other than 480p

component are not received when signals
are output from the VIDEO jack. Input
480i component video signals.

• When component input signals other than

480p are output, use the COMPONENT
VIDEO MONITOR OUT jack and set
“Resolution” to “DIRECT”.

Recording cannot be carried out.

• Check that the components are connected

correctly (page 25).

• Select the source component using INPUT

SELECTOR (page 50).

The GUI does not appear on the TV
screen.

• Press GUI MODE repeatedly to select

“GUI ON”. Press MENU if the GUI menu
does not appear on the TVscreen.

• Check that the TV is connected correctly.

HDMI

The source sound input to the HDMI
jack is not output from the receiver or
the TV speaker.

• Check the HDMI connection (page 86).
• You cannot listen to the Super Audio CD

by connecting HDMI.

• Depending on the playback component,

you may need to set up the component.
Refer to the operating instructions
supplied with each component.

• Be sure to use a connecting cable for the

HDMI jack corresponding to high speed
(an HDMI version 1.3a, category 2 cable)
when you view images or listen to sound
during a Deep Color (Deep Colour)
transmission.

The source image input to the HDMI
jack is not output from the TV.

• Check the HDMI connection (page 86).
• Depending on the playback component,

you may need to set up the component.
Refer to the operating instructions
supplied with each component.

• Be sure to use a connecting cable for the

HDMI jack corresponding to high speed
(an HDMI version 1.3a, category 2 cable)
when you view images or listen to sound
during a Deep Color (Deep Colour)
transmission.

The Control for HDMI function does not
work.

• Check the HDMI connection (page 86).
• Make sure “Control for HDMI” is set to

“ON” in the HDMI settings menu.

• Make sure the connected component is

compatible with the Control for HDMI
function.

• Check the Control for HDMI settings on

the connected component. Refer to the
operating instructions of the connected
component.

• Repeat the procedures of “Preparing

Control for HDMI function” if you change
the HDMI connection, connect/disconnect
the AC power cord (mains lead), or when
there is a power failure (page 87).