Sony STR-DA3400ES - Manual (Page 108)

108 US
D:\Cannes\STR-DA3400ES_U_R1\3289137121\3289137121\3289137121\01US-
STRDA3400ESUC\090OTH.fm masterpage: Left
STR-DA3400ES
3-289-137-12(1)
To set up the speakers
Set “Sur Back Assign” to “BI-AMP” in the
Speaker settings menu. The same signals
output from the SPEAKERS FRONT A
terminals can be output from the SPEAKERS
SURROUND BACK terminals by setting “Sur
Back Assign” to “BI-AMP”.
Notes
• You cannot use the SPEAKERS FRONT B
terminals for a bi-amplifier connection.
• Set “Sur Back Assign” to “BI-AMP” before you
perform Auto Calibration.
• If you set “Sur Back Assign” to “BI-AMP”, the
speaker level, balance, and equalizer settings of the
surround back speakers become invalid, and those
of the front speakers are used.
• Signals output from the PRE OUT jacks are used
with the same settings as those of the SPEAKERS
terminals.
• If you set “Speaker Pattern” to a setting with
surround back speakers, you cannot set “Sur Back
Assign” to “BI-AMP”.
Operating without
connecting to the TV
You can operate this receiver using the display
window if you do not use a GUI when a TV is
not connected.
Press GUI MODE to display “GUI
OFF” in the display window.
When “GUI MODE” is displayed in the
display window, the menu is set to display on
the TV screen using a GUI.
1
Press AMP.
2
Press MENU.
3
Press V/v repeatedly to select
the menu you want.
Navigating through menus on
the display window
CATEGORY
MODE
GUI
MODE SLEEP
NIGHT
MODE RESOLUTION
MUSIC MOVIE
SOURCE SIRIUS XM
HDMI2 HDMI1 HDMI3
HOME
HDMI4
VIDEO2 VIDEO1 BD DVD
PHONO TUNER MULTI
IN DMPORT
TV
1
THEATER
2 3
4 5 6
7 8 9
-/-- 0/10 ENT/MEM CLEAR
D.TUNING
WIDE
TV INPUT
AMP ZONE TV SHIFT
SAT MD/
TAPE
SA-CD/
CD
A.F.D. A.DIRECT
2CH/
INPUT
MODE
GUI
1
3-8
2