Sony RHT-G800 - Manual (Page 46)

46 US
• Check that the component is connected
correctly to the video input jacks for that
component.
• Check that the cords are fully inserted into
the jacks on both the component and this
stand.
HDMI CONTROL
Refer HDMI CONTROL Guide supplied with
this operating instructions.
OTHER
The remote does not function.
• Point the remote at the remote sensor on
the stand.
• Remove any obstacles in the path between
the remote and the stand.
• Replace both batteries in the remote with
new ones, if they are weak.
• Make sure you select the correct input on the
remote.
If the stand still does not operate
properly after performing the
above measures, reset the stand
as follows:
Use buttons on the stand for the operation.
1
Press ?/1 to turn on the power.
2
Press INPUT SELECTOR, VOLUME –,
?/1 at the same time.
“COLD RESET” appears and the stand is
reset. AMP menu, sound field etc., return to
the default settings.
Specifications
Dimensions:
mm (inch) A 1,115 (44)
B 400 (15 3 / 4 )
C 495 (19 1 / 2 )
Weight: kg (oz) 59 (130 lb 1 oz)