Speaker setup notes, Step 4, Connecting to the internet – Sony VGX-XL1 User Manual
Page 42: Wired network, Wireless network, Step 4: connecting to the internet
VGX-XL1 Digital Living System
39
Speaker Setup Notes
•
After the 5.1 channel sound is setup, sound will not be outputted through
the HDMI connection if your HDMI connections does not support 5.1
channel sound. To enable HDMI sound, uncheck the
Enable Dolby
Digital Live
check box and check/select the
Enable HDMI Output
check
box located on the Sound Reality Control Panel, Advanced tab. This will
disable the 5.1 channel sound output.
•
Dolby Digital 5.1 must be selected for the audio output of the DVD from the
DVD menu. Note: The VGX-XL1 does not support DTS sound decoding.
Step 4: Connecting to the Internet
Wired Network
Use an RJ-45 connector cable. Connect one end to the Ethernet connector on
the DSL computer and the other end to your cable or DSL modem.
Wireless Network
Connect the WLAN antenna (included) to the connector on the back panel of
the XL1 computer.
Chp2.fm Page 39 Thursday, November 10, 2005 11:49 AM