Sony VGX-XL1 - Manual (Page 129)

126 VGX-XL1 Digital Living System
The computer restarts and displays a page with the following VAIO Recovery
options:
• Restore C: Drive
• Restore Complete System
• Reconfigure RAID
5 Click Reconfigure RAID . A Reconfigure RAID page displays. Read the
information.
6 Click Next .
The Reconfigure RAID (Step 1 of 1) screen displays. Read the information on
the screen including the
WARNING statement.
7 Select the I understand check box and click Next .
The VAIO Recovery program automatically deletes all RAID arrays on the
hard disk drive. When complete, a message displays with instructions on
completing the process.
8 Leave the disc in the optical drive and click OK .
The computer restarts and displays a screen with the following options:
• Restore C: Drive
• Restore Complete System
• Reconfigure RAID
9 Click Restore Complete System to restore all original factory-installed
software. See Restore Complete System, page 11 for step-by-step
instructions to perform this procedure.
10 When complete, start the Intel Matrix Storage Console and configure your
RAID array(s), as desired.
See Intel Matrix Storage Console , for additional information.
Note : If for any reason a RAID array cannot be deleted, a message displays
stating “No RAID Array Detected.” Click OK to close the message and then
click Back to return to the previous screen.
App C HDD Rec .fm Page 126 Thursday, November 10, 2005 12:57 PM