Sony DSC-P93 - Manual (Page 101)

101
Tr
ou
bl
esho
ot
ing
Smart zoom does not
function. • [Digital Zoom] is set to [Precision]or [Off] in the
SET UP settings.
• The image size is set to [5M] (DSC-P93), [4M]
(DSC-P73) or [3:2].
• You are shooting in Multi Burst mode.
• This function cannot be used when you shoot a
movie.
p Set [Digital Zoom] to [Smart] (pages 27, 47, 116).
p Set image size to other settings except [5M] (DSC-P93), [4M]
(DSC-P73) and [3:2] (pages 22, 27).
p The smart zoom cannot be used in Multi Burst mode (pages 27,
61).
—
The image is too dark. • You are shooting a subject with a light source
behind the subject.
• The brightness of the LCD screen is too low.
p Select the metering mode (page 57).
p Adjust the exposure (page 55).
p Adjust the brightness of the LCD backlight (pages 47, 117).
The image is too bright. • You are shooting a spot lighted subject in a dark
location such as on a stage.
• The brightness of the LCD screen is too high.
p Adjust the exposure (page 55).
p Adjust the brightness of the LCD backlight (pages 47, 117).
When looking at the LCD
screen in a dark place,
some noise may show up
on the LCD screen. • The camera temporarily brightens the LCD
screen to allow you to check the image being
displayed while you are using the camera in a
dark place.
p This will have no effect on the image you shoot.
The image is
monochrome (black and
white). • [PFX] (P.Effect) is set to [B&W]. p Cancel the mode (page 62).
Vertical streaks appear
when you are shooting a
very bright subject. • The smear phenomenon is occurring. p This is not a malfunction.
You cannot shoot in Burst
mode. • The capacity of the “Memory Stick” is full.
• The camera can record only one image, since the
remaining battery level is insufficient.
p Delete unnecessary images (pages 42, 81).
p Install charged batteries (page 11).
Symptom Cause Solution