Sony MHC-GX9000 - Manual (Page 38)

masterpage:Left
Frame\MHC-GN880\MHC-GN880 GB\GB11TRB-E3.fm]
38 GB
model name [MHC-GN880/GN770/GX9000/GN660]
[4-252-939-12(1)] GB
MP3 audio track cannot be played back.
• Recording was not performed according to the
ISO9660 level 1, level 2, or Joliet in the expansion
format.
• The MP3 audio track does not have the extension
“.MP3”.
• The data is not stored in MP3 format even though
it has extension “.MP3”.
• The discs containing files other than MPEG 1, 2
and 2.5 Audio Layer-3 files cannot be played
back.
• The system can playback to a depth of 8 folders
only.
• MP3 audio tracks in MP3 PRO format cannot be
played on this system.
MP3 audio tracks take longer time to playback
than others.
• After the system reads all tracks on the discs,
playback may take more time than usual if:
– the number of albums or tracks on the disc is
very large.
– the album and track organization structure is
very complex.
The album title, track title, ID3 tag and the
CD-TEXT characters do not appear properly.
• Use a disc that conforms with ISO9660 level 1,
level 2, or Joliet in the expansion format.
• The ID3 tag is not version 1 or version 2.
• The character code that can be displayed by this
system are as follows.
– Upper cases (A to Z)
– Lower cases (a to z)
– Numbers (0 to 9)
– Symbols (< > * +, – / [ ] \ _)
Other characters may not be displayed correctly.
Tuner
There is severe hum or noise/stations cannot
be received. (“TUNED” or “STEREO” flashes
in the display)
• Set the proper band and frequency (page 16).
• Connect the antenna properly (page 9).
• Find a place and an orientation that provide good
reception, then set up the antenna again. If you
cannot obtain good reception, we recommend you
connect an external antenna.
• The supplied FM lead antenna receives signals
along its entire length, so make sure you extend it
fully.
• Locate the antennas as far away from the speaker
cords as possible.
• Consult your nearest Sony dealer if the supplied
AM antenna has come off the plastic stand.
• Try turning off surrounding electrical equipment.
• Set “CD POWER OFF” by CD power manage
function (page 17).
A stereo FM program cannot be received in
stereo.
• Press FM MODE until “MONO” disappears in the
display.
Tape deck
The tape does not record or playback, or there
is a decrease in sound level.
• The heads are dirty (see “Cleaning the tape heads”
on page 41).
• The record/playback heads are magnetized (see
“Demagnetizing the tape heads” on page 41).
The tape does not erase completely.
• The record/playback heads are magnetized (see
“Demagnetizing the tape heads” on page 41).
There is excessive wow or flutter, or the sound
drops out.
• The capstans or pinch rollers are dirty (see
“Cleaning the tape heads” on page 41).
Noise increases or the high frequencies are
erased.
• The record/playback heads are magnetized. (see
“Demagnetizing the tape heads” on page 41).