Audio/video, What should i do if i cannot use my dv camcorder, How do i turn off the windows startup sound – Sony VGN-FW170J User Manual
Page 169
Troubleshooting
Audio/Video
What should I do if I cannot use my DV camcorder?
If it is prompted that the i.LINK device seems to be disconnected or turned off, the i.LINK cable may not be securely plugged
into the port on your computer or camcorder. Unplug the cable, and plug it in once again. See
Connecting an i.LINK Device
for more information.
✍
i.LINK is a trademark of Sony Corporation used only to designate that a product contains an IEEE 1394 connection. The procedure to establish an i.LINK
connection may vary, depending on a software application, an operating system, and a compatible i.LINK device. Not all products with an i.LINK
connection can communicate with each other. See the manual that came with your compatible i.LINK device for more information on operating
conditions and proper connection. Before connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk drive, confirm
their operating system compatibility and required operating conditions.
How do I turn off the Windows startup sound?
To turn off the Windows startup sound, follow these steps:
1
Click
Start
and
Control Panel
.
2
Click
Hardware and Sound
.
3
Click
Manage audio devices
under
Sound
.
4
On the
Sounds
tab, click to cancel the
Play Windows Startup sound
check box.
5
Click
OK
.