Using the “quick navi, Help guide – Sony DSC-RX10 User Manual

Page 120

Digital Still Camera

DSC-RX10

Using the “Quick Navi”

You can change the settings directly using the Quick Navi screen when using the viewfinder.

1. Press the DISP (Display Setting) button on the control wheel repeatedly until the screen is set to [For

viewfinder].

2. Press Fn (Function) button to switch the screen to Quick Navi screen.

3. Select the desired function by pressing the up/down/left/right side of the control wheel.

4. Turn the control wheel to select the desired setting.

Performing settings on the dedicated screen

Select the desired function in step 3, then press

on the center of the control wheel. The dedicated

setting screen for the function appears. Follow the operating guides (A) to perform the settings.

How to Use

111