Sony PEG-UX50 - Manual (Page 32)

32
Sony Personal Entertainment Organizer PEG-UX50/UX40 US 4-676-076-11 (1)
B Check that the settings for [SSID:] or [WEP Key:] are correct in the SSID
Setup screen, which can be displayed by tapping [Edit…] from [SSID] in
the menu of the Wireless LAN Setup screen.
B Your CLIÉ handheld may be connected to a wireless LAN access point
other than the target one when [-Auto Connect-] is selected.
In the
Wireless LAN Setup screen, check that the target wireless LAN
access point is listed just below [-Auto Connect-] and [-Auto Connect-] is
selected.
(The list can be reordered by tapping or .)
You can also select the SSID for the target wireless LAN access point
instead of selecting [-Auto Connect-] from [SSID:] in order to explicitly
connect to the target one.
B The channel setting must be channels 1-11 for the wireless LAN access
point.
Change the channel setting for an appropriate channel.
b For details on setup, refer to the manual of the wireless LAN access point.
B Your CLIÉ handheld and the wireless LAN access point may be too far
away.
You need to be closer to the wireless LAN access point when trying to
connect to it.
B Some obstacles, such as metal plate or concrete, are in the way between
your CLIÉ handheld and the wireless LAN access point.
Move your CLIÉ handheld or the wireless LAN access point to find the
best reception, or do not select [Power Save:] in the
SSID Setup screen.
(Note that if you do not select [Power Save:], the battery power is
consumed more quickly.)
B SSID may be set to be hidden from the wireless LAN access point side.
In such a case, your CLIÉ handheld cannot detect it via the scan operation.
B The wireless LAN access point may not be connected to the Internet.
Connect the wireless LAN access point to the Internet.
b For connection details, refer to the manual of the wireless LAN access point.
I cannot connect to the Internet via a wireless LAN (for
PEG-UX50 only)