Sony PEG-UX50 - Manual (Page 23)

23
Sony Personal Entertainment Organizer PEG-UX50/UX40 US 4-676-076-11 (1)
Tr
ou
ble
s
ho
ot
ing
For particular problems regarding HotSync
®
operations, refer
to the following.
B Is the USB port active?
Check whether the USB port works normally by connecting another USB
device, such as a USB mouse.
B If you use an extended terminal devices for laptop computers, such as a
port replicator, you may not be able to use either the port replicator or the
USB port of your computer.
B Quit all applications other than Palm™ Desktop for CLIÉ .
If you cannot perform the HotSync
®
operation even after following the
above instructions, perform a soft reset by pressing the RESET button.
b For details, refer to “Basic operations of your CLIÉ™ handheld: Restarting your
CLIÉ™ handheld” in the supplied “Read This First (Operating Instructions)”.
I cannot start the HotSync
®
operation by tapping
(HotSync) on the HotSync screen
B Ensure [Local] and [Cradle/Cable] are selected in the HotSync screen.
B Perform a soft reset by pressing the RESET button.
b For details, refer to “Basic operations of your CLIÉ™ handheld: Restarting your
CLIÉ™ handheld” in the supplied “Read This First (Operating Instructions)”.
I cannot cancel the HotSync
®
operation midway
B You may not be able to stop the HotSync
®
operation by tapping [Cancel]
for over ten seconds after you start the USB HotSync
®
operation. Try
again after a while.
B If you disconnect your CLIÉ handheld and computer during the HotSync
®
operation, the HotSync
®
operation may not perform correctly.
In such a case, perform a soft reset.
b For details, refer to “Basic operations of your CLIÉ™ handheld: Restarting your
CLIÉ™ handheld” in the supplied “Read This First (Operating Instructions)”.
Verify the following first
Continued on next page
• • • • • • • • • • • • • • • • • • • •