Asus m3n-hd/hdmi 2-29 – Asus M3N-HD User Manual
Page 55
ASUS M3N-HD/HDMI
2-29
6. CPU, chassis, and power fan connectors
(4-pin CPU_FAN; 3-pin CHA_FAN1; 3-pin PWR_FAN)
The fan connectors support cooling fans of 350 mA~2000 mA (24 W max.)
or a total of 1 A~7 A (84 W max.) at +12V. Connect the fan cables to the fan
connectors on the motherboard, making sure that the black wire of each
cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! Do not place jumper caps on the fan connectors!
• Only the CPU_FAN and CHA_FAN 1 connectors support the ASUS Q
FAN2 feature.
• If you install two VGA cards, we recommend that you plug the rear chassis
fan cable to the motherboard connector labled CHA_FAN1 for better themal
environment.
M3N-HD/HDMI
®
M3N-HD/HDMI Fan connectors
CHA_FAN1
CPU_FAN
PWR_FAN
Rotation
+12V
GND
GND
+12V
Rotation
CPU F
AN PWM
CPU F
AN IN
CPU F
AN PWR
GND