Using the built-in projector, Using the built-in projector (hdr-pj200), Handycam" user guide – Sony HDR-PJ200 User Manual
Page 67
Search
Saving images with an external
device
Top page > Playback > Using the built-in projector > Using the built-in projector (HDR-PJ200)
Using the built-in projector (HDR-PJ200)
You can use a flat surface such as a wall as a screen to view recorded images using the built-in
projector.
The LCD screen turns off while an image is being projected. Use the power zoom lever/PHOTO button
to operate the camcorder.
1. Face the projector lens towards a surface, such as a wall, and then press PROJECTOR.
2. When the operating guide screen appears, select [Project].
This screen appears the first time you use the built-in projector.
3. Adjust the focus of the projected image using the focus lever.
A: PROJECTOR FOCUS lever
The projected image is larger when the distance between your camcorder and the reflecting
surface increase.
It is recommended that you place the camcorder further than 0.5 m (1.6 feet) away (approximate
distance) from the surface that the images are to be projected onto.
4. Move the power zoom lever to select the image you want to play, then press PHOTO to begin
playback.
60