Sony MZ-R70 - Manual (Page 51)

51
4
Press . or >N to select a letter and press ENTER (x) .
The selected letter stops flashing and the cursor moves to the
next input position.
5
Repeat step 4 and enter all characters of the label name.
To cancel labeling, press EDIT for 2 seconds or more or press
T MARK.
6
Keep pressing ENTER (x) for 2 seconds or more.
The track or disc is labeled.
Labeling a track during playback
1
Insert a disc and play the track you want to label.
2
Press EDIT for 2 seconds or more so that “EDIT” flashes in the
display, and then press ENTER (x).
“
: Name” flashes in the display.
3
Press ENTER (x).
The track is ready to be labeled.
4
Follow steps 4 to 6 of “Labeling a disc during stop” (page 50).
Press To
CAPS (X) Switch between capital letters,
small letters and marks / numbers.
VOL +/– Move the cursor to the left or right.
./>N
(
>SELECT.)
Change the letter to the one before /
next one.
EDIT Insert a blank space to type in a new
letter by pressing within 2 seconds.
Cancel labeling by pressing for 2
seconds or more.
DELETE Delete a letter and move back all
following letters to the left.
T MARK Cancel labeling